Bruce[2].jpg (4158 bytes)
Bruce Roberts-Goodson
EMAIL BRUCE

BUILD FOR LESS WITH
BRUCE ROBERTS

You can build a NEW boat for less than the cost of a USED one !
Check out our study boat plans for costing information.


Gwenda Roberts-Goodson
HOME PAGE

Roberts SPRAY 460 - Pre-cut steel kit or cutting files 
boat plans include Gaff rig
. Bermudian rig . Junk rig

NEW: TWO VERSIONS NOW AVAILABLE AS KITS - A & C.

KIT....BIGGER, BETTER  offshore cruising pilot house sail boat. The Spray 460 is longer plus the beam has been increased to maintain the proportional beam of the other proven Spray designs, this greatly increases the livable interior space and allows wider side decks. This boat sails more upright as is the case with the other Spray designs which rarely exceed 10 degrees of heel ... you family will love this feature.

There are over 5,000 Sprays already sailing world wide plus over 1,000 currently being built from our boat plans and kits. We have been willing to listen to every combination of idea's about this wonderful boat and several layouts have been drawn. Many of these features are interchangeable between the various versions.

This boat is designed in accordance with Lloyds  for category 1 (unrestricted operating / sailing area), which is much better than the EU and other Classification Societies and the  CE-A require. Complete stability calculations are included in the design package. All calculations are also cross referenced against ABS requirements to ensure that the design meets world-wide standards and specifications.

In the case of KITS, all plate parts belonging to the hull, deck and superstructure that are accurately cut to size are included. The parts are marked with the appropriate part number and engraved matching marking lines to assist in the assembly and location of the part in its position. Cutting method is Plasma / Oxygen, ensuring highest accuracy and smooth edges.
 
Plate parts are cut from Lloyds approved A Grade Shipbuilding quality STEEL that has been coated with factory applied Sigma weld MC welding primer.  We use and recommend steel plate that has the official designation ISO standard 10474 or EN 10204 with 3.1.B certificate.

Many of these Sprays have completed complete circumnavigations some more than once & usually with crews consisting only of two persons !

Check out our e-book BUILD YOUR OWN SPRAY for details.

L.O.D. 14.05  m 46'    1"
L.W.L. 11.48  m 37'    8"
BEAM 4.75  m 20'    6"
DISPLACEMENT 18,144 kg 40,000 lb

S460-SAIL.gif (17637 bytes)
 

SPRAY 460 A

Cutter rig shown - Several alternate rigs are available for the Spray 460

See study boat plans for all alternate rigs and accomodation layouts.

S460-ACCOM.gif (26904 bytes)

SPRAY 460 A

Spray 460 A - Aft cockpit - Pilot house accommodation layout

SPRAY 460 A

Spray 460 assembled from one of our KITS by Mike and Pam Ford in Dubai

S460-SAIL-POOP.gif (24194 bytes)

SPRAY 460 C

Cutter rig shown - Several alternate rigs are available for the Spray 460

See study boat plans for all alternate rigs and accomodation layouts.

 

 

S460-A.gif (25664 bytes)

SPRAY 460 C

Accommodation for Center cockpit - poop stern or aft trunk cabin - pilot house

 

S460-P2.jpg (11983 bytes)

SPRAY 460 A

Spray 460 assembled from one of our KITS by Mike and Pam Ford in Dubai

STUDY PLAN PACKAGES ON DOWNLOAD or on CD - YOU CHOOSE DOWNLOAD OR CD. . .
GIVE ACCESS TO HUNDREDS OF step by step BOAT & KIT ASSEMBLY PHOTOS ... See details

S460-P3.jpg (14109 bytes)

SPRAY 460 A

Spray 460 assembled from one of our KITS by Mike and Pam Ford in Dubai

S460-P4.jpg (23596 bytes)

SPRAY 460 A

Spray 460 assembled from one of our KITS by Mike and Pam Ford in Dubai

CS45_1.jpg (27125 bytes)

One of Hundreds Spray's now
sailing worldwide ... This one built in Riga Latvia

Roberts SPRAY "Shiloh"

 

ASSEMBLING A SPRAY KIT

EMAIL     -      HOME / INDEX PAGE