Boatplans Roberts 341

Roberts 341 (CANOE STERN) Fiberglass plans and frame patterns
Over 100 of this fine cruising sailboat are in service world-wide. Designed for those of you that are looking for the sea going qualities of a canoe stern then this is the design for you. The R341 design was prepared for those people who are looking for a modern, high performance cruising boat that is based on the traditional Scottish fishing vessel. This strong, sea-worthy, double-ender is available with full or long fin keel, and can be rigged as a sloop or a cutter with a basic sail area of either 621 sq ft for the cutter or 559 sq ft for the sloop.

Two accommodation layouts are provided, one for the aft cockpit version (A) and one for the Pilothouse version (B). This design has construction plans available in FIBERGLASS only.

PRINTED Study plans ( NOTE: This is a PRE-COMPUTER design so only PRINTED study plans are available for this plan. These are intended to give you an overview of the particular design and include all available Accommodation plans, Sail plans, Material lists & Construction sheets covering available construction materials. All drawings are to scale and you can take measurements from these plans. There are between 6 and 10 sheets of drawings in the typical study plan package. CLICK HERE TO ORDER STUDY PLANS

L.O.A.	10.39 m	34' 1''
L.W.L.	8.64 m	28' 4"
BEAM	3.50 m	11' 6"
DRAFT	1.52 m to 1.68 m	5' 0" or 5' 6"
SAIL AREA	62 sq m	621 sq ft
BALLAST	2950 kg	6,500 lb
DISPLACEMENT	7200 kg	20,750 lb
AUX. PWR		20 - 30 hp

Larry Parkinson in Texas sent us this email & photographs.

Have a "perfect" Bruce Roberts 341 and have used it to cruise the ICW from South Texas to the Keys, the Bahamas, and up the East Coast for the last nine years. Laid the keel in 1985 and launched in 1986 in Seabrook, Tx. Did not follow plans on cockpit, but laid it out flat from pilothouse door. Gives us a "patio" over a great workroom and generator room. Now that I've found you, I'll stay in touch and draw on your expertise. Thanks for a great boat. HONAHLEE thanks Larry

From: Larry Parkinson
Date: 4/20/01 Time: 3:45:24 AM
Comments: We just finished an eleven year cruise on our Roberts 341. She was built beginning in 1985, finished in 1986. The boat is a superb cruiser, roomy, and easy to handle.

Dear Mr. Roberts, Many years ago (approx.1983) I purchased the plans for the Roberts 341A and built it over the span of many years. I have now been sailing it since 1990 off the shores of Halifax Nova Scotia. I am very pleased and impressed with the sailing characteristics and appearance of the boat. I would very much like to build a model of the boat for my basement as a center-piece. However, the drawings are full size and I was wondering if I could get a 1/10 version or an offset table to produce the lines. Yours truly, Wolfgang Dzimbowski ...
BRUCE replied ... no problem and sent Wolfgang some specially sized patterns.